Murray Steel Products has an extensive in-house ISO 9001 and CE Execution Class 4 accredited processing operation, which includes high-definition profiling, cutting and drilling.
Our team produce a wide range of bespoke steel profiles and products for customers, some of which are showcased below.
Click here for more information about our processing capabilities.
An order for a customer in the water industry, consisting of Prime S275 25mm & 35mm gauge profiled rings.
One face has been machined to very tight tolerances, the other skimmed, with 32 50mm diameter drilled holes per piece, each to a tolerance of +/- 0.2mm.
This 10mm gauge chequer-plate is part of an ongoing piece of work, and will soon be delivered to a telecommunications project in West Africa.
Including 26mm diameter countersinking with 14mm profiled holes, these pieces were profiled to size using our Hypertherm XPR300 Plasma cutting system.
We manufactured and supplied these S355J2+N plasma and gas cut profiles for an agricultural client.
This piece of work included plate gauges from 25mm to 80mm, with profiled slots and 25mm diameter holes drilled to a tolerance of +/- 0.2mm.
We manufactured and supplied these steel profiles for one of our clients in the offshore sector. The project consisted of 8 prime S355G10+N profiles, each at a gauge of 110mm.
Oxy-Gas profiled to a diameter of 800mm at a tight tolerance, each piece weighs over 300 kilos, bringing the set to over 2.4 tonnes in total.
This project included Z35-tested prime S355J2 and S460NL steel plate, with dimensions up to 3.4m x 2m, and gauges up to 150mm.
Weighing in at 50 tonnes overall, this order included profiles with 33mm & 39mm diameter holes, drilled to a tolerance of +/-0.2mm. Additional processing included edge chamfering and countersunk holes.
A selection of heavy architectural work we have completed this week. These prime 10mm thick S275JR, high-definition plasma cut profiles contain an array of profiled slots and holes at tolerances of +/-2mm. Spanning up to 7.5m x 3m in size, there are 396 different pieces weighing in at 20 tonnes in total.
These 25mm gauge flanges have been plasma cut to dimensions of 1.1mx1m and 1600mm x 1100mm. We drilled 528 26mm diameter holes for this project, each with a tolerance of +/- 0.2mm.
This order also consisted of 35mm flame-cut profiles with drilled and tapped holes, weighing in at a total of 12 tonnes.
